Mom Designs - 16 oz uv dtf transfer

UV DTF transfers are suitable for 16oz glass Libbey's. You can also cut out the designs to stick them individually. 

They will adhere to most hard surfaces. They are waterproof and scratch-resistant. 

* Not recommended for dishwashers. 

* Each wrap is approximately 9.6 x 4.4" 

* You may need to trim as needed. 

Directions: 

1. Peel backing off the transfer
2. Place transfer on the cup. Make sure it is straight as you cannot lift it again to reposition. 
3. Smooth the design from the centre out to remove any bubbles
4. Rub the decals down with your fingers or a squeegee 
5. Peel the top layer of film off the design